GAUGES AND TEST EQUIPMENT PDF Print E-mail

  

GAUGES AND TEST EQUIPMENT 

Nitrous Oxide is a colorless, non-flammable gas which, under certain conditions, can be stored in liquid form. In a nitrous bottle, the contents is liquid up to a certain level with gaseous nitrous above the liquid. 

The gas pressure on top of the liquid is what exerts the force on the liquid nitrous below, forcing it through the siphon tube and out of the bottle.  This pressure above is totally dependent on the nitrous bottle temperature.

The temperature of your bottle therefore has a dramatic effect on the performance of any kind of nitrous system.  When the bottle is chilled, the pressure inside is lowered.  As is the case when heating a nitrous bottle, this will increase the pressure in the bottle. Since nitrous pressure effects the flow the nitrous oxide, you should always try to maintain the recommend nitrous pressure.  All Compucar systems are designed to operate correctly at 1000 PSI.......

WARNING!  MAKE SURE GAUGE IS SEALED TO ADAPTER WITH LIQUID TEFLON PIPE SEALANT PRIOR TO USING GAUGE.

PART#

342229                Ford T-gauge adapter with 0-100 gauge

342230                Fuel 0-15 PSI gauge

342232                Fuel 0-100 PSI 1/8 NPT glycerin filled

342234                0-1500 PSI liquid filled gauge

342235                Nitrous PSI gauge with #4 adapter

342236                Nitrous PSI gauge with #6 adapter

342240                0-100 PSI TBI/TPI pressure test kit

342526                Fuel Flo-set tool with hose

342527                Deluxe Flo-set tool with gauge